We require a number of Duct Fitters to carry out the installation and fabrication of air conditioning ducts for commercial construction projects.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill Requirements:

• Sound knowledge of sheet metal duct installation
• Ability to work with different types of piping and the different processes to fit the air ducts.
• Knowledge of reading air duct plans and designs.
• Ability to install ducting overhead in a secure manner.
• Fitting and welding experience preferred.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

Multiple Elevator Technicians are required to undertake all the necessary duties and tasks to complete required construction work to build and install elevators and elevator shaft equipment for commercial construction projects.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Accountabilities

Safety:

• Take reasonable care of their own health and safety duties
• Take reasonable care that what they do or not do does not adversely affect the health and
• safety of other persons
• The employee must wear the PPE provided at all times whilst on work sites

Tasks:

• bolting and setting out brackets
• installation of elevator rails
• assembly of elevator/lift car accessories
• installation of door jambs/push button boxes/elevator interior

Skills:

• knowledge of elevator mechanics
• skill in interpreting designs, plans and instructions
• knowledge of building and safety regulations
• rigging or scaffolding experience preferred

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

Our client has positions available for experienced Electricians to undertake the necessary duties and tasks which include but are not limited to the maintenance, installation and repair of all related electrical systems, equipment and cables.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Offering a variety of work on major projects in the commercial sector, great health and safety practices as well as being able to adapt to situations as they come is a must.

You will need to have:

• Commercial and domestic residential experience
• Be a driven and motivated individual with a strong work ethic
• Good attention to detail
• Great Safety practises

Required Tasks:

• Assembling and installing fixings i.e. cable trays and brackets
• measuring, positioning and laying out equipment for installation
• reference points.
• Replace Lights bulbs and light tubes.
• Ordering and delivery of equipment and tools.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

Multiple positions available for experienced Electrical Assistants to undertake the necessary duties and tasks which include but are not limited to the maintenance, installation and repair of all related electrical systems and equipment.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Tasks:

• reading and understanding blueprints, wiring diagrams and specifications
• installing, repairing and replacing new and defective wiring and parts
• measuring, positioning and laying out equipment installation reference points and electrical switchboards
• using electronic and electrical test equipment and instruments to check circuit continuity and to diagnose faults

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

Plumber/Pipe Fitters will be required in the installation of pipework for chilled and heating water used to heat and cool buildings. Work will be for both overhead and underground piping, where threading and welding of pipes will be required.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill requirements:

• Sound knowledge of all Plumbing and Pipe Fitting aspects.
• Ability to work with different types of piping and the different processes to fit these pipes.
• Installation experience of hot (approx. 82 degrees) and cold (approx. 6 degrees) water piping
• used to heat and cool buildings.
• Knowledge of reading and designing pipework plans for all building heating and cooling
• pipework.
• Ability to install piping for both overhead and underground.
• Fabricating experience preferred.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

Multiple experienced Plumber Assistants are required to work on some of the city’s most prominent commercial construction sites.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

To be considered for these opportunities you must have experience as a plumbing trades assistant within the commercial construction or maintenance sectors as your daily duties will include:

* Measuring, cutting and shaping pipes
* Installing, joining and sealing pipes and fittings
* Installing hot water and heating systems such as hot water tanks, central heating, gas heaters and heat pumps
* Laying drains
* Installing sewerage and gas pipes
* Installing fixtures such as gas stoves, toilets, basins, septic tanks and air-conditioning systems

You will be motivated, energetic, and will have the ability to follow direct instructions whilst working within a large team environment. You will have sound knowledge of plumbing and drainage materials and method, skills in interpreting plans, as well as strong sense of health & safety practices.

Welding skills would be advantageous.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

Our client requires experienced Fire Sprinkler System Installers for the installation of pipework, sprinklers and related structures used for fire protection systems in commercial building projects.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill Requirements:

• Fitting/installing fire protection systems, sprinkler piping systems, sprinkler heads and related structures
• Using different types of piping and different processes to fit the pipes
• Reading and working from pipework plans and/or blueprints

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

Mechanical Pipefitters will be required in the installation of pipework for chilled and heating water used to heat and cool buildings. Work will be for both overhead and underground piping, where threading and welding of pipes will be required.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill requirements:

• Sound knowledge of all mechanical pipe fitting aspects.
• Ability to work with different types of piping and the different processes to fit these pipes.
• Installation experience of hot (approx. 82 degrees) and cold (approx. 6 degrees) water piping used to heat and cool buildings.
• Knowledge of reading and designing pipework plans for all building heating and cooling pipework.
• Ability to install piping for both overhead and underground.
• Fabricating experience preferred.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

We require a number of Maintenance Fitters for the preparation and installation of cavities, ducts and pipes for maintenance services in large civil and commercial projects.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill Requirements:

• Studying and reading blueprints/drawings of lay out accurately.
• Drilling and installing metal bolts and brackets for maintenance services including hydraulic and pneumatic pipes and lines.
• Checking and fabricating metal parts accurately according to plans.
• Cutting, threading, bending insulating and installing pipes.
• Working at different heights and levels, including overhead ducting.
• Fitting and welding of metal ducts where required.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

Due to a rapid increase in our clients future work flow, we are currently looking for experienced Glaziers.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

You will have an exceptional track record in various Glazier roles that will enable you to competently work in a factory or on site. If you can maintain high work standards, be a team player and are keen to expand your skill set then we want to hear from you.

Technical Requirements:

• Experience in Factory and/or on site Glazing works.
• Excellent experience in curtain wall installation.
• Self-motivated, honest and a positive attitude.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

We require a number of Fitter/Welders to carry out structural welding on various steel structures as well as interpreting welding designs and plans on major commercial projects.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill Requirements:

• Sound knowledge of all fitting/welding.
• Ability to fit and weld on to various steel structures.
• Knowledge of reading and understanding welding drawings.
• Working knowledge of different metal types

• Ability to read plans

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

We are currently looking for experienced Fire alarm system installers to work on various major commercial projects for immediate starts.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Your ability to follow plans but also problem solve where required is a key aspect to this role, as well as having a high level of customer service.

Skill Requirements:

• Sound knowledge of alarm system installation.
• Experience with various types of alarm panels.
• Knowledge of different types of alarm system layouts.
• Ability to read plans.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

The role requires the operation of heavy excavation plant to excavate, move and spread materials.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill Requirements:

• Preparing and positioning plant for operation.
• Using machine controls to excavate, move and spread materials.
• Monitoring the operation of plant and adjusting controls to ensure correct operation and ensuring the safety of other workers.
• Working from plans and/or drawings, markers and verbal instructions.
• Maintaining, cleaning and refuelling plant when necessary.
• General labouring to clear and prepare sites for excavation.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

To provide the trade skills, knowledge, experience and competency to undertake carpentry work to comply with the specified requirements of the contract works in a safe and timely manner.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill Requirements:

• Demonstrate competency in carpentry, being familiar with building procedures.
• Able to carry out the following works, site set ups, work from plans, construct timber shutters/framing/trusses, steel tying, concrete placing & finishing, sub-flooring, drywall installation, exterior cladding, install windows, hang doors.
• Experience with levels and heights ensuring trueness of structures.
• Able to competently operate the following tools – nail gun, skill saw, electric drill, grinder, drop saw.
• Have previous experience in the construction industry.
• Maintain a tidy work site in line with H & S regulations.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.

We require a number of Boilermakers to carry out structural welding on boilers, pressure vessels and other steel structures for a large commercial project in the City.

Our client has roles available in Christchurch, Queenstown and Dunedin. If candidates are required to travel between the locations, accommodation and travel expenses will be provided to successful applicants if applicable.

Skill Requirements:

• Experience constructing, assembling, maintaining, and repairing stationary steam boilers and boiler house auxiliaries.
• Sound knowledge of fitting and welding.
• Ability to fit and weld on to various steel structures to assemble boiler frames, tanks or vats.
• Knowledge of reading and understanding welding drawings.
• Working knowledge of different metal types.
• Experience using various hand and power tools.

If you believe you are the right candidate for this role, please submit your CV through the link.

Please note that all applications will be reviewed, but only shortlisted applicants will be contacted. Calls will not be fielded for this role.